This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Doing Doors The Right Way

How You Can Install a Deadbolt to Your Door The deadbolts offer a higher degree of your home security from intruders than a spring-loaded door knob can do. A key has to be used to open a deadbolt from any side. If you want to install a deadbolt on your home, the procedure is pretty simple. Most of the manufacturers have a template instruction you on how to install it. To get a clear picture of installing a deadbolt, read this article. Start by reading on the manufacturer’s instructions template. It has reference indicating points to marked on the door using an awl. The position should be above six inches above the door knob. Drilling a hole for the deadbolt should follow. Use the manufacturers reference points to make the holes. The holes should be made using a hole saw.Finishing the hole from the other side of the door will prevent splinters. Of your hole saw is not big enough to go through the breadth of the door use a standard bit to drill.
What Do You Know About Doors
The third step involves drilling a hole through the edge of the door. The 211/2″ spade bit drill will have to be used here. Go on to mortise the area around the faceplate. A wood chisel should be used so that it will be flush with the door. Utilize a smaller chisel for the rounded corners.
A Quick Overlook of Deadbolts – Your Cheatsheet
Move on to fasten the bolt to the door. As long as the faceplate has not fit perfectly, you need to continue with mortising. Make the pilot holes and fasten the deadbolt to the door with screws. The nest stage is the installation of the cylinder and the thumb level. To begin with, fix the exterior side while making sure that the writing is upright. Continue to work on the interior and tighten the screws where the mounting holes should be inside the lock. To fasten the deadbolt, make use of screws. With paint or lipstick, mark the tip of the bolt. Mark the door frame by first shutting the door and turning the bolt many times. The 7/8″ spade bit should be applied to drill two holes in the door frame for the deadbolt. Mortise the surrounding of the holes such that the strike bolt will be flush with the door frame. Make pilot holes and tighten the bolts with screws. Having done this, your home security is enhanced than relying on the standard spring-loaded door knob.In case you feel that the procedure is somehow complex for you, you beer seek an expert to do it for you. It is imperative that you avoid mistakes that can lose you if you do it on your own. Such a mistake can mean that you deface your door with ugly marks which you won’t likeTo make sure you get it right, keep your eye on the guide plus the manufacturer’s template.